Skin

So I dug out my skins that I have been saving since 2004!!  They look great and will be fun to get these fitted.  A quick test slide on to the frame shows all is well.

First I used a hacksaw blade to gently remove all the panels (after marking first) then I filed all the openings smooth. A jig saw was used to carefully cut out my 3/4 rear door.

Here is the back panel after gluing the two parts together with good old JB Weld.  I cleaned the excess off with a popsicle stick with a squared off edge.  I only have enough clamps to do a few parts at a time so I will do the front skins tomorrow.